ex.Mahle PIS Clogging Indicators

ex.Mahle PIS Clogging Indicators
Filter elements are economically used only if their dirt holding capacity is fully exploited. This is achieved by using filter housings with a maintenance indicator.

FILTRATION GROUP manufactures maintenance indicators of the following designs:
  • Differential pressure indicators
  • Pressure indicators/switches/gauges
  • Vacuum switches/gauges
With any filter element the collection of dirt particles continously reduces the number of open pores or, in other words: The open cross section for allowing the liquid to flow is continously reduced. Thus the pressure on the upstream side of the element (dirt side) increases continously.

With pressure filters, the pressure is measured upstream and downstream of the filter element (differential pressure). With return line filters the pressure is measured only on the upstream side because, depending on the tank design, atmospheric pressure exits on the downstream side of the filter element is measured analog. With suction filters the vacuum is measured downstream.

A piston with attached magnet is moved against the force of a spring, with which the indicating point is determined by the piston surface. A homopolar poled magnet is fitted in the outer part in the indicating button.

The closer the pole-springs move towards each other, the stronger is the force with the magnets mutually repel, until finally the red button on the indicator pops out.

This red button remains visible until it is pushed in during the daily check which is to be performed while the plant is at operating temperature. If the button pops out immediately after being pushed in, the filter element must be replaced latest at the end of the shift.

This optical function may also be used for generating contactless electrical signals. For this purpose an electrical upper part is pushed over the hydraulic/optical part. This upper part incorporates all electrical switching elements.

Optical and electrical indicator with standard check function
Normally open/normally closed combination - standard feature
Electrical function, easy to install at a later time
Two-step indication, at 75 % and 100 % optional
Signal lock out up to approx. 30 °C optional
Rugged, non-bypass design
Optimal element exploitation
Worldwide distribution

Related Products

  • Ufi-Sofima CI for Offline Filters
  • Stauff HI Series
  • Ufi-Sofima CI for Return Filters
  • Ufi-Sofima CI for Suction Filters

CONTACT INFORMATION

Headquarters
Orhan Gazi Mah. Hadımköy Hoşdere Yolu
Mimsan San. Sit. 1719. Sok. 12B Blok No:7
Esenyurt - İstanbul - Türkiye
PK:34517 
Tel: 0212 672 30 72
Fax: 0212 672 30 73
Gsm: 0535 892 42 28
Gsm: 0533 430 05 75
E-mail: info@guardfilter.com

Aegean Region
Adalet Mah. Anadolu Cad. No:41/091
Megapol Tower
Bayraklı - İzmir - Turkey
Tel: +90 232 935 81 04
Fax: +90 232 935 81 04
Gsm: +90 545 343 90 79
E-mail: ege@guardfilter.com

CONTACT FORM

captcha [Refresh Code]