In the Guard Filter DPG, the movement of the piston is converted into appropriate calibrated rotary movement of the pointer through a magnetic connection. This type of piston model is used in applications where minor migration of the media from high pressure side (HP) to low pressure side (LP) is permitted.
SPECIFICATIONS
Accuracy : ±2% of the FSD (Ascending)
Migration : Minor from high to low port
Range : 0-1.25 and 0-2.5 bar
First marking on the scale : 20% of the FSD
Sensing element : Piston
Wetted parts Body material : SS 302 spring
Case material & dial size : Stainless steel (SS 304): 2.5” – 63 mm
Engineering polymer : 2.5”
Bayonet : 4.0”
Mounting : Direct
Maximum working pressure : 200 bar for Aluminum
Maximum process temperature 0 to 80°C (32 to 175°F)
Body material : Aluminum
Seals : Buna-N
Window Float glass(Std.)
Connection : 1/4" BSP(F)
Porting : In-line
Over range protection Up to the max. working pressure from high & low side
Protection for gauge & switch IP 66 / NEMA-4
SPECIFICATIONS
Accuracy : ±2% of the FSD (Ascending)
Migration : Minor from high to low port
Range : 0-1.25 and 0-2.5 bar
First marking on the scale : 20% of the FSD
Sensing element : Piston
Wetted parts Body material : SS 302 spring
Case material & dial size : Stainless steel (SS 304): 2.5” – 63 mm
Engineering polymer : 2.5”
Bayonet : 4.0”
Mounting : Direct
Maximum working pressure : 200 bar for Aluminum
Maximum process temperature 0 to 80°C (32 to 175°F)
Body material : Aluminum
Seals : Buna-N
Window Float glass(Std.)
Connection : 1/4" BSP(F)
Porting : In-line
Over range protection Up to the max. working pressure from high & low side
Protection for gauge & switch IP 66 / NEMA-4
